| Grade | Application recommended |
| YG6/ K20 | For the cutting of ordinary wood, Recommend to use resistance welding,and the temperature should not be too high |
| YG8/K30 | For the cutting of the ordinary wood,also for the aluminum, Recommend to use resistance welding,and the temperature should not be too high |
| YK08/K40 | For the cutting of the recycling wood especially for some iron nails and stones in it, Recommend to use resistance welding,and the temperature should not be too high |
| JX5/K20 | For the cutting of the hard wood/recycling wood and aluminum, Recommend to use resistance welding,and the temperature should not be too high |
| YG6X/K10 | For the cutting of the wood specially, recommend to use the high frequency welding |
| YG8X/K10 | For the cutting of the wood and aluminum specially, Recommend to use the high frequency welding |
| K10S | For the cutting of the hard wood specially, Recommend to use the high frequency welding |
| K20S | For the cutting of the aluminum specially, Recommend to use the high frequency welding |
| K10UF | For the cutting of the plywood,board with middle to high density and the compound materials with aluminum and plasic, Use the high frequency welding |
| K20UF | For the cutting of the aluminum specially, Use the high frequency welding |
| K30UF | For the cutting of the stones specially, Use the high frequency welding |
| R06 | For the cutting of the plywood,density board and the sandwich board, Use the high frequency welding |
| R03 | For the cutting of the timber such as shaving board,laminated boar,density board and compound material etc, Use the high frequency welding |
| YC40 | For the cutting of the large cast materials, Recommend to use the high frequency welding |
| YC501 | For the cutting of the steel and the stainless steel, Recommend to use the high frequency welding |
